MACROMEDIA BREEZE-CLUSTERING BREEZE LIVE Uživatelský manuál stáhnout pdf (Strana 29)

ADOBE CONNECT ENTERPRISE SERVER 6

Installation and Configuration Guide

FCS_EDGE_REG_INTERVAL The interval, in milliseconds, at which the edge server attempts to register with the

origin server. This parameter determines how often the edge server makes itself available to the origin server.

FCS_EDGE_PASSWORD (Optional) A password for the edge server. If you set a value for this parameter, you must set

the same value for every edge server and origin server.

DEFAULT_FCS_HOSTPORT (Optional) To configure the edge server ports, add the following line to the custom.ini

file:

DEFAULT_FCS_HOSTPORT=:1935,80,-443.

The minus sign (-) in front of 443 designates port 443 as a secure port that receives only RTMPS connections. If you

attempt an RTMPS connection request to port 1935 or 80, the connection will fail. Similarly, an unsecured RTMP

connection request to port 443 will fail.

Note: If your edge server uses an external hardware accelerator, port 443 does not have to be configured as a secure port.

5 Ontheoriginserver,opentheApplicationManagementConsole(Start>AllPrograms>AdobeConnectEnter-

prise Server > Configure Adobe Connect Enterprise Server). Select the Application Settings tab, then select Server

Settings and, in the Host Mappings section, enter the External Name for the edge server. The External Name should

be identical to value set for the

FCS_EDGE_HOST parameter on the edge server.

6 In the custom.ini file on the origin server, map the value of the FCS_EDGE_CLUSTER_ID parameter to a zone ID and

save the file. This authorizes the edge zone. The syntax is

edge.cluster-id=zone-id.

Each edge server cluster should have a zone ID. A zone ID can be any positive integer greater than 0. For example,

you could have four clusters mapped to zones 1 to 4:

edge.adobe-emea=1

edge.adobe-apac=2

edge.adobe-sf=3

edge.adobe-boston=4

Note: Even if you are only deploying one Connect Edge Server, you must map the cluster ID name to a zone ID.

7 If you set an FCS_EDGE_PASSWORD parameter on the edge server, set the same password in the custom.ini file on the

origin server and save the file.

8 On the origin server, configure the Windows firewall so the edge servers can access port 8506.

9 Repeat steps 2-4 for each edge server in each zone.

10 Repeat steps 5-8 for each origin server in each zone.

For help deploying edge servers, contact Adobe Support at

www.adobe.com/go/connect_licensed_programs_en.

Žádné komentáře

MACROMEDIA BREEZE-CLUSTERING BREEZE LIVE Uživatelský manuál Strana 29